Newsletter:

Propane LPG Sequential Injection Kits for 8cylinder EFI petrol car

Propane LPG Sequential Injection Kits for 8cylinder EFI petrol car
上一个
下一个

LGC-LCK08

V8 Propane LPG Multipoint Sequential Injection System Conversion kits for Gasoline EFI Engines    RFQ

With this system installed, the car will run on either petrol or LPG, it's bi-fuel system, you can switch between both fuels.

1. LPG sequential Reducer/Vaporizer (super type, power up to 250KW), come with LPG Solenoid Valve, if higher power required, use two units. 
2.  Gas ECU set for V5/V6/V8: Electronic Control Unit, Harness, Water Temperature Sensor, Emulator, Micro-switch, Map Sensor.
ECU Software: Mach Pro, support 11 languages-- 1) English 2) Chinese 3)Polish 4) Russian 5) Thai 6) Turkish 7) Spanish 8) French 9) German 10) Dutch 11) Italian;
For 10/12/16cylinder engines, you can consider to use two sets.
3. 4cylinder Injector Rail*2units, 3cyl*2unit available also.
4. Gas Filter*2units: Installed after regualtor before injection rail, to filter the low pressure LPG
5. High pressure steel tubing: dia6mm*length6meter 
6. Low Pressure Hoses
7. Mounting Fittings: Accessories for connecting/sealing/fixing the gas components, included the Low Pressure Tee (1 or 2 units) for connecting two gas rails; 
8. 
Gas ECU Programming cable--At least 1unit is needed for new buyer, not necessary to buy if you had one yet; For Gas ECU connect to computer to calibrate/program to reach a proper air-fuel ration for different power of cars; It is special, other ones may not suit to our kits
9. Not Included Items here
LPG tank, Multivalve, tank brackets,  refuel valve, refuel hose. (Too heavy to ship or may not suit to your local requirements) 


LPG/Propane CNG/methane Gas Conversion kits from LGC:
- Sequential injection system kits, two types: suit to 3-4 and 5-6-8 cylinders electronically controlled injection cars;
- Normal/Traditional Suction system kits suit to 3/4/5/6/8 cylinders injection cars, EFI as well as carburetor engines; performance not good as injection system, mainly for cars older than 1990's, for newer cars, we recommended sequential injection systems, better.
- Do not suit to FS I(fuel straight injection/direct injection) engines, nor diesel engines either.

How to install the Propane LPG System Gas Conversion Kits in cars?
Please download Installation manuals and software via "Tech Support" or contact LGC:
Setup software for Mach Pro Gas ECU 1.5.1.rar  (Updated: 10/8/2013, compatible with all versions of mach pro gas system from LGC.)
ECU wiring diagram 4cyl(2nd and 3rd pages are explanation).pdf
ECU Wiring Diagram for 6 & 8cly.pdf 
Mach Pro ECU Programming Guidance.pdf    (Updated: 20/6/2012) 

LPG CNG Sequential injection system kits installation manual.pdf 
Propane LPG Sequential Kits Installation Pictures.pdf 
Methane CNG Sequential Kits Installation Pictures.pdf 
Installation notes for Propane LPG sequential reducer.pdf

4cylinder Methane CNG sequential kits installing pictures-from tank to rail.pdf

(If you are a green hand of installing the gas kits--no matter LPG or CNG, recommend you take an overview of these installation pictures with instruction: The explanation would be much more clear to guide you install the gas kits.)

Injector-Nozzles-Tap installation.pdf    (Helpful!)

How to use LGC's Products? For greeners, we recommend you the Easiest and fastest way to start from Zero (Take 4cyliner CNG injection system for example):
1. Check visualized installation diagram from LGC to have a general view of how is the full system connected together
2. Check 4Cylinder Gas ECU wiring diagram for the system to see how is the electronics wired
3. See Installation pictures for reference
4. Study the installation manuals: “LPG CNG Sequential injection system kits installation manual.pdf”, “Mach Pro ECU Programming Guidance.pdf”
5. Start your conversion on a car and contact LGC for guidance if questions during installation.
(Installation of other gas systems from LGC: take the above steps as reference.)


Propane LPG Sequential injection System(for 8cylinder EFI/MPI gasoline engines) Visulized Installation Diagram for reference:

 

Contact us

E-mail: arnoldc@lgc.hk    
Mobile: +86 18923838916
ebay store:carpartslogas
http://stores.ebay.com
/carpartslogas
Tel:+86 755 81780556 Email:arnoldc@lgc.hk Copyright ©2006 LGC, All Rights Reserved.
QR Code