Propane LPG Sequential Injection Kits for V5 or V6 engines

Propane LPG Sequential Injection Kits for V5 or V6 engines


Propane LPG Multipoint Sequential Injection System Gas Conversion kits for 5 or 6cylinder EFI gasoline cars   RFQ

With this system installed, the car will run on either gasoline or LPG, it's a bi-fuel system, you can switch between both fuels.

1. LPG sequential Reducer/Vaporizer (super type, power up to 250KW), come with Solenoid Valve 
2.  Mach Pro Gas ECU set for V5/V6/V8: Electronic Control Unit, Harness, Water Temperature Sensor, Emulator, Micro-switch, Map Sensor.
ECU Software: Mach Pro, support 11 languages--  1) English 2) Chinese 3)Polish 4) Russian 5) Thai 6) Turkish 7) Spanish 8) French 9) German 10) Dutch 11) Italian;
3. 3cylinder Injector Rail*2units
4. Gas Filter*2units: Installed after regualtor before injection rail, to filter the low pressure LPG
5. High pressure steel tubing: dia 6mm*length 6meter 
6. Low Pressure Hoses
7. Mounting FittingsAccessories for connecting/sealing/fixing the gas components, included the Low Pressure Tee (1 or 2 units) for connecting two rail; If used 2 regulator, will include 1 High Pressure Tee.
8. Gas ECU Programming cable--At least 1unit is needed for new buyer, not necessary to buy if you had one yet; For Gas ECU connect to computer to calibrate/program to reach a proper air-fuel ratio for different power of cars; It is special, other ones may not suit to our kits
9. Not Included Items hereLPG tank, Multivalve, tank bracketsrefill valve, refill hose. (Too heavy to ship or may not suit to your local requirements).

:Propane Methane system Gas kits for petrol cars from LGC:

- Sequential injection system kits, two types: suit to 3-4 and 5-6-8 cylinders electronically controlled injection cars;
- Normal/Traditional Suction system kits suit to 3/4/5/6/8 cylinders injection cars, EFI as well as carburetor engines; performance not good as injection system, mainly for cars older than 1990's, for newer cars, we recommended sequential injection systems, better performance.
- Do not suit to FSI (fuel straight injection/direct injection) engines, nor diesel engines either.

How to install the Propane LPG system Gas Conversion kits in cars?
Please download Installation manuals and software via "Tech Support" or contact LGC:

Setup software for Mach Pro Gas ECU 1.5.1.rar  (Updated: 10/8/2013, compatible with all versions of mach pro gas system from LGC.)
ECU wiring diagram 4cyl(2nd and 3rd pages are explanation).pdf
ECU Wiring Diagram for 6 & 8cly.pdf 
Mach Pro ECU Programming Guidance.pdf    (Updated: 20/6/2012) 
LPG CNG Sequential injection system kits installation manual.pdf 
Propane LPG Sequential Kits Installation Pictures.pdf 
Methane CNG Sequential Kits Installation Pictures.pdf 
(If you are a green hand of installing the gas kits--no matter LPG or CNG, recommend you take an overview of these installation pictures with instruction: The explanation would be much more clear to guide you install the gas kits.)

How to use LGC's Products? For greemers, we recommend you the Easiest and fastest way to start from Zero (Take 4cyliner CNG injection system for example):
1. Check visualized installation diagram from LGC to have a general view of how is the full system connected together
2. Check 4Cylinder Gas ECU wiring diagram for the system to see how is the electronics wired
3. See Installation pictures for reference
4. Study the installation manuals: “LPG CNG Sequential injection system kits installation manual.pdf”, “Mach Pro ECU Programming Guidance.pdf”
5. Start your conversion on a car and contact LGC for guidance if questions during installation.
(Installation of other gas systems from LGC: take the above steps as reference.)

Propane LPG Sequential injection System(for 8cylinder EFI/MPI gasoline engines) Visualized Installation Diagram for reference:

Contact us

Mobile: +86 18923838916
ebay store:carpartslogas
Tel:+86 755 81780556 Copyright ©2006 LGC, All Rights Reserved.
QR Code