Newsletter:

Methane CNG Sequential Injection System Conversion Kits for 5 or 6 Cylinder Gasoline EFI Cars

Methane CNG Sequential Injection System Conversion Kits for 5 or 6 Cylinder Gasoline EFI Cars
上一个
下一个

LGC-CCK06

Methane CNG Multipoint Sequential Injection System Conversion kits for V5 or V6 gasoline EFI Cars    RFQ

With this system installed, the car will run on either petrol or CNG, it's bi-fuel system, you can switch between both fuels.

1.
Super CNG Sequential Reducer/Regulator--Power up to 250KW, with two gas outlet ports; come with CNG Solenoid Valve 
2. CNG Pressure Gauge
3. Gas ECU set
for V5/V6/V8: Electronic Control Unit, Harness, Water Temperature Sensor, Emulator, Micro-switch, Map Sensor
The ECU programming Software is named Mach Pro, support 11 languages: 1) English 2) Chinese 3)Polish 4) Russian 5) Thai 6) Turkish 7) Spanish 8) French 9) German 10) Dutch 11) Italian;
4.
3cylinder Injection Rail*2units
5.
Gas Filter*2units: Installed after regualtor before injection rail, to filter the low pressure CNG
6.
High pressure steel pipe/tube: dia6mm*length6meter
7.
Low Pressure Hoses
8. Mounting Fittings: Hardware etc. for connecting/fixing/sealing the autogas kits on car
9. Gas ECU Programming cable--At least 1unit is needed for new buyer, not necessary to buy if you had one yet; For ECU connect to computer to calibrate/program  to reach a proper air-fuel ratio for cars of different power; It is special, other ones may not suit to our kits
10. Not Included Items here
CNG tank, tank valverefill valve
, tank brackets(Too heavy to ship or may not suit to your local requirements) 

Propane/LPG Methane/CNG Gas Conversion kits from LGC:
Sequential injection system kits, two types: suit to 3-4 and 5-6-8 cylinders injection cars;
Normal Suction system kits suit to 4/6/8 cylinders injection cars, EFI as well as carburetor engines. Mainly for cars older than 1990's, for newer cars, we recommend injection system, better performance;
Do not suit to FSI(fuel straight injection) engines, nor diesel engines either.



How to install the Methane CNG system gas Conversion kits in cars?
Please download Installation manuals and software via "Tech Support
" or contact LGC:

Setup software for Mach Pro Gas ECU 1.5.1.rar  (Updated: 10/8/2013, compatible with all versions of mach pro gas system from LGC.)
ECU wiring diagram 4cyl(2nd and 3rd pages are explanation).pdf
ECU Wiring Diagram for 6 & 8cly.pdf 
Mach Pro ECU Programming Guidance.pdf    (Updated: 20/6/2012) 
LPG CNG Sequential injection system kits installation manual.pdf 
Methane CNG Sequential Kits Installation Pictures.pdf 
 
(If you are a green hand of installing the gas kits--no matter LPG or CNG, recommend you take an overview of these installation pictures with instruction: The explanation would be much more clear to guide you install the gas kits.)



Methane CNG Sequential injection System(for 8cylinder EFI/MPI gasoline engines) Visualized installation diagram for reference:

 

How to use LGC's Products? For greeners, we recommend you the Easiest and fastest way to start from Zero (Take 4cyliner CNG injection system for example):
1. Check visualized installation diagrams from LGC to have a general view of how is the full system connected together
2. Check 4Cylinder Gas ECU wiring diagram for the system to see how is the electronics wired
3. See Installation pictures for reference
4. Study the installation manuals: “LPG CNG Sequential injection system kits installation manual.pdf”, “Mach Pro ECU Programming Guidance.pdf”.
To see how to program the Gas ECU--mainly to reach a proper air-fuel ratio for cars of different power

5. Start your conversion on a car and contact LGC for guidance if questions during installation.
(Installation of other gas systems from LGC: take the above steps as reference.)

Contact us

E-mail: arnoldc@lgc.hk    
Mobile: +86 18923838916
ebay store:carpartslogas
http://stores.ebay.com
/carpartslogas
Tel:+86 755 81780556 Email:arnoldc@lgc.hk Copyright ©2006 LGC, All Rights Reserved.
QR Code